Каталог

PT-AE6000

Видеопроектор (1,920 × 1,080 pixels / 2,400 lm)

Подробнее...

PAN001

1 780,00 €

1 780,00 € за gb./шт.

ModelPT-AE8000/AT6000*1
Power supply100–240 V AC, 50/60 Hz
Power consumption310 W (0.08 W in standby mode)
LCD*2 panelPanel size18.7 mm (0.74 in) diagonal (16:9 aspect ratio)
Display methodTransparent LCD panel (× 3, R/G/B)
Drive methodActive matrix
Pixels2,073,600 (1,920 × 1,080) × 3, total of 6,220,800 pixels
Lamp*3220 W UHM lamp (The lamp replacement cycle is up to 4,000 hours 
(lamp power: NORMAL) / 5,000 hours (lamp power: ECO)*4)
LensPowered zoom (2.0x) / focus lenses (1.35:1–2.70:1), F 1.9–3.2, f 22.4–44.8 mm
Projection size (diagonal)2D projection1.02–7.62 m (40–300 inches)
3D projection1.02–5.08 m (40–200 inches)
Throw distance2D projection1.16–18.08 m (3 ft 10 in to 59 ft 4 in)
3D projection1.16–12.0 m (3 ft 10 in to 39 ft 4 in)
ColorsFull color (1,073,741,824 colors)
Brightness*52,400 lm*6
Center-to-corner uniformity ratio*585%
Contrast ratio*5500,000:1*7 (full on/full off)
Resolution1,920 × 1,080 pixels
Scanning frequencyHDMI480p, 576p, 720/60p, 720/50p, 1080/60p, 1080/50p, 1080/60i, 1080/50i, 1080/24p
RGBfH: 15 kHz–74 kHz, fV: 24 Hz–85 Hz,
dot clock: 154 MHz or lower
YPBPR (YCBCR)525i (480i): fH 15.7 kHz; fV 59.9 Hz,
525p (480p): fH 31.5 kHz; fV 59.9 Hz,
750 (720)/60p: fH 45.0 kHz; fV 60.0 Hz,
1125 (1080)/60i: fH 33.8 kHz; fV 60.0 Hz,
1125 (1080)/24p: fH 27.0 kHz; fV 24.0 Hz,
1125 (1080)/50p: fH 56.3 kHz; fV 50.0 Hz
625i (576i): fH 15.6 kHz; fV 50.0 Hz,
625p (576p): fH 31.3 kHz; fV 50.0 Hz,
750 (720)/50p: fH 37.5 kHz; fV 50.0 Hz, 
1125 (1080)/50i: fH 28.1 kHz; fV 50.0 Hz,
1125 (1080)/60p: fH 67.5 kHz; fV 60.0 Hz,
Video/S-VideofH : 15.7 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60], 
fH : 15.6 kHz, fV: 50.0 Hz [PAL/PAL-N/SECAM]
Optical axis shift*8Vertical: ±100%, horizontal: ±26%
Keystone correction rangeVertical: approx. ±30°
InstallationCeiling/desk, front/rear (menu selection)
TerminalsHDMI INHDMI connector × 3, HDMI (Deep Color, x.v.Color™,*9 CEC*10), 
HDCP compliant, supports HDAVI Control Version 5
COMPUTER (RGB) IND-sub HD 15-pin (female) × 1 (RGB/YPBPR/YCBCR × 1)
COMPONENT INRCA pin × 3 (YPBPR/YCBCR)
TRIGGER IN / TRIGGER OUT / 
3D SHUTTER OUT
M3 × 2 (operate as 3D IR transmitter connectors)
(input/output/3D shutter output selectable using on-screen menu)
VIDEO INRCA pin × 1
S-VIDEO INMini DIN 4-pin × 1
SERIAL IND-sub 9-pin × 1 for external control (RS-232C compliant)
Power cord length3.0 m (9 ft 10 in)
Cabinet materialsMolded plastic (PC+ABS)
Dimensions (W × H × D)470 × 151 × 364*11 mm (18-1/2 × 5-15/16 × 14-11/32*11 inches)
Weight*12Approx. 8.7 kg (19.2 lbs)
Operation noise*522 dB (lamp power: ECO)
Operating temperature0°C–40°C (32°F–104°F)*13
Operating humidity20%–80% (no condensation)
Remote control unitPower supply3 V DC (AA/R6 type battery × 2)
Operation range*14Approx. 7 m (23 ft) when operated from directly in front of the signal receptor
Dimensions 
(W × H × D)
48 × 138 × 28.3 mm
(1-7/8˝ × 5-7/16˝ × 1-1/8˝)
WeightApprox. 125 g (4.4 oz) (including batteries)
Supplied accessoriesPower cord (× 1) (× 2 for PT-AE7000EA)
Wireless remote control unit (× 1)
Batteries for remote control (AA/R6 type × 2)
Lens cover (× 1)
Optional accessoriesReplacement 
lamp unit
ET-LAA410
Ceiling mount bracketET-PKA110H (for high ceilings)
ET-PKA110S (for low ceilings)
3D IR transmitterET-TRM110
3D EyewearTY-EW3D3M*15
*1
Product numbers vary depending on the market. PT-AE8000 is the product number for areas outside of Europe, and PT-AT6000 is the product number within Europe.
*2
The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology to provide the finest possible image. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*3
The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
*4
The values above are maximum values when they are used in cycles of being turned on for 2 hours and off for 0.25 hours. When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. The usage environment affects the lamp replacement cycle.
*5
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*6
In dynamic mode, with dynamic iris on.
*7
In cinema 1 mode, with dynamic iris on.
*8
Shift range is limited during simultaneous horizontal and vertical shifting.
*9
Effective in Rec. 709 picture mode.
*10
CEC is an abbreviation for Consumer Electronics Control. Operation may not be possible with some connected equipment or settings.
*11
With legs at shortest position.
*12
Average value. May differ depending on models.
*13
When [HIGH ALTITUDE MODE] is set to [ON]: 0°C – 35°C (32°F–95°F)
*14
Operation range differs depending on environments.
*15
If you do not have a Panasonic 3D TV that supports 3D video, use a charger that has a USB2.0 port for charging your Eyewear. 
The recommended charger is Apple USB Power Adapter for iPhone. The code that follows KBC-L2 may differ depending on the country of purchase. 
The code at the end of the model number of 3D Eyewear may differ depending on the country of purchase.

Написать собственный обзор

PT-AE6000

PT-AE6000

Видеопроектор (1,920 × 1,080 pixels / 2,400 lm)

Написать собственный обзор